Made in USA · In stock, ships worldwide · Plug-n-play in under 1 minute
DroneTrack, Counter Drone Specialists
DroneTrack, Counter Drone Specialists
$0.00 0

Cart

No products in the cart.

SPECIFICATIONS

Every DroneTrack specification, and what it means for your site

Range, frequencies, direction finding, Remote ID, power and cabling for the DroneTrack Drone Detection System. $5,995 per unit with the software included.
Buy the system
Download the spec sheet
DroneTrack Drone Detection System in Military Green on a tripod

The six figures most buyers check first

40 / 80 km
Detection range against consumer / military drones. Range on your site depends on terrain, line of sight and placement.
70 MHz to 6 GHz
The receiver's tuning range, covering all commercial drones and most FPV drone bands.
6-element array
A circular direction-finding array, 450 MHz to 6 GHz, that gives a live bearing to each drone.
360°
Coverage around every unit, including drones flown over 3G, 4G and 5G.
Under 1 min
From power-on to detecting. No calibration flights, no integrator.
-40°C to +70°C
Operating range, at night and in fog and rain.
$5,995 per unit, with the software platform and the desktop and mobile apps included. In stock, free worldwide shipping.
On this page

Finds drones up to 80 km away, in every direction

DroneTrack finds drones by the radio links they need to fly, and reads Remote ID where a drone broadcasts it. Range on your site depends on terrain, line of sight and where you place the unit.
See how detection works
Detection range
40 km (consumer UAV) / 80 km (military UAV)
  • Early warning, well before a drone reaches your perimeter.
Coverage
360°, full RF spectrum including 3G/4G/5G
  • Catches drones flown over mobile networks, from any direction.
Detection technology
RF direction finding + Remote ID
  • Finds drones that never broadcast Remote ID, and reads the ID of those that do.
Detection method
Passive RF monitoring and Remote ID detection
Supported drone bands
All commercial drones and most FPV drone bands
Swarm detection
Multiple simultaneous drones
  • Tracks several drones at once, not just the first one it finds.
Max simultaneous drones
[MAX SIMULTANEOUS DRONES]
Triangulation
Yes, multi-unit capability
  • Two or more units show the drone's position and the pilot's.
Time to alert
[TIME TO ALERT]
Drone library
[DRONE LIBRARY]
AI processing
On-device, no internet required
  • Detection keeps working with no internet connection.
Setup time
< 1 minute (plug-n-play)
  • No calibration flights and no integrator.

Hears drone control, telemetry and video links from 70 MHz to 6 GHz

A dual-channel software-defined radio scans the bands drones use to fly, report back and stream video. On-device AI then separates drones from Wi‑Fi and background noise.
Receiver type
Dual-channel software-defined radio receiver
  • Tuned and adjusted in software, not with hardware changes.
Receiver architecture
Direct-conversion wideband RF architecture
Receive channels
2, coherent dual-channel reception
Hardware tuning range
70 MHz to 6 GHz
  • Covers the control, telemetry and video links of commercial and most FPV drones, including drones flown over 3G, 4G and 5G.
Max instantaneous bandwidth
Up to 56 MHz single-channel, up to 30.72 MHz per system dual-channel
  • Watches a wide slice of spectrum at once.
Analog receive bandwidth
Software-adjustable, approx. 200 kHz to 56 MHz
Analog-to-digital conversion
12-bit
Max converter sample rate
61.44 MS/s
Receiver gain
Software-adjustable, up to approx. 76 dB
RF port impedance
50 ohms
Max recommended RF input
−15 dBm
Host interface
SuperSpeed USB 3.0
Signal processing
Programmable FPGA-assisted digital signal processing

A live bearing to every drone, from one unit

Six antennas sit in a circle, and a fast solid-state switch samples each one in turn so the unit can work out which way a signal comes from. Two or more units cross their bearings to show where the drone and the pilot are.
One unit or several?

Direction-finding array

Array configuration
Six-element circular antenna array
  • Gives a live bearing to each drone, so your team knows which way to look.
Antenna elements
6
Frequency support
450 MHz to 6 GHz
Direction-finding method
Intelligent RF power sampling with vector-based angle-of-arrival processing
Bearing accuracy
[BEARING ACCURACY]

RF switching system

Switch type
High-speed solid-state RF antenna switch
Switched antenna inputs
6
Switch controller
Dedicated embedded high-performance microcontroller
Switching operation
Automatic and continuous during RF direction finding
  • Nothing to steer or set up; the bearing updates as the drone moves.

Reads Remote ID without interrupting tracking

Two dedicated receivers read Wi‑Fi and Bluetooth Remote ID broadcasts, separately from the direction finder. Drones that broadcast Remote ID show their ID and operator details. Drones without it are still found by their radio links.

Wi‑Fi Remote ID receiver

Receiver type
Dedicated USB Wi‑Fi monitoring adapter
Operating mode
Passive monitor mode
Supported bands
Configuration-dependent 2.4 GHz and 5 GHz
Broadcast types
Wi‑Fi beacon Remote ID, Neighbor Awareness Networking, compatible manufacturer-specific IDs
Operation
Independent from the main direction-finding receiver
  • Reads Remote ID without interrupting direction finding.

Bluetooth Remote ID receiver

Receiver type
Dedicated Bluetooth Low Energy receiver
Primary function
Detection and decoding of compatible Bluetooth Remote ID broadcasts
Operation
Continuous passive scanning
Compatibility
Dependent on broadcast format and regional implementation
Remote ID standards
[REMOTE ID STANDARDS]

Networked units stay aligned, and your team sees it all in one app

A GNSS receiver in every unit keeps a multi-unit network aligned. The software platform and the desktop and mobile apps come with every unit.
See the software
Positioning receiver
Fast-acquisition GNSS positioning receiver
  • Keeps networked units aligned so their bearings cross at the right place.
High-speed receiver connection
USB 3.2 over Ethernet
Unit to operator link
[UNIT LINK]
Software
Software platform: dashboard, spectrum analyzer, push alerts, incident logging. Desktop and mobile apps
  • Included with every unit, with no separate licence.
Software requirements
[SOFTWARE REQUIREMENTS]
Integration options
[INTEGRATION OPTIONS]
Data output
[DATA OUTPUT]

One cable to lay for power and data

One armored Cat6 run carries power over Ethernet and data. 12V DC also works, and the PoE injector and 110 to 220 V supply are in the box.
Input power
110 to 220 V
  • Runs on mains power in most countries, with the supply in the box.
Unit power
12V DC or PoE compatible
  • Use PoE, or 12V DC where there is no network power.
PoE standard
[POE STANDARD]
Power draw
[POWER DRAW]
Cabling
Armored Cat6 UTP Ethernet cable
  • One cable to lay for power and data.
Supplied cable length
[CABLE LENGTH]
Connectors
[CONNECTORS]

Built to run outdoors, all year

DroneTrack works at night and in fog and rain, from -40°C to +70°C. It stands on the tripod and mast in the box, at fixed, portable and multi-node sites.
Illustration of the DroneTrack unit on its tripod at a secure site
Illustration
Operating conditions
Night, fog, rain, -40°C to +70°C
  • Runs outdoors all year.
Storage temperature
[STORAGE TEMPERATURE]
Humidity
[HUMIDITY]
Wind rating
[WIND RATING]
Ingress protection
[IP RATING]
Dimensions (unit / packed)
[DIMENSIONS]
Weight (unit / with tripod)
[WEIGHT]
Mounting
Tripod mount with adjustable mast, in the box. [MOUNTING]
Mounting height
[MOUNTING HEIGHT]
Tripod height
[TRIPOD HEIGHT]
Designed for
Fixed-site, portable and multi-node deployments
  • Stand it up for an event, or leave it at a fixed site.

Made in Georgia, USA, with engineers you can call

Hardware and software are designed and made in Columbus, Georgia. Questions on a figure go straight to our engineers.
Talk to an engineer
Origin
Hardware and software, Columbus, Georgia, USA
Countermeasures
None. Detection only: no jamming or spoofing
  • Passive monitoring, so it does not transmit against drones.
Certifications
[CERTIFICATIONS]
Export classification
[EXPORT CLASSIFICATION]
Warranty
[WARRANTY TERMS]
MTBF
[MTBF]
Spec questions
Mon–Fri 8am–6pm ET, reply within 1 business day
Illustration of the DroneTrack kit: sensor unit, tripod, armored cable and power supply
Illustration. The full contents are listed here.

Everything you need to start detecting, in one box

1 ×
DroneTrack RF sensor unit with six-element direction-finding array, in your chosen finish
1 ×
Tripod mount with adjustable mast
1 ×
Armored Cat6 cable, carries power and data
1 ×
PoE injector and 110 to 220 V power supply
Incl.
Software platform: dashboard, spectrum analyzer, push alerts, incident logging
Incl.
Desktop and mobile apps, no separate licence
Triangulation pack: three complete sets, one per unit, in one finish, $17,985.
One unit or several? Compare the options
Read the setup guide

Three finishes. Same unit, same price.

Military Green, Pearl White and Matte Black are identical apart from colour. $5,995 each.
DroneTrack Drone Detection System in Military Green on a tripod

Military Green

$5,995 per unit
Choose Military Green
DroneTrack Drone Detection System in Pearl White on a tripod

Pearl White

$5,995 per unit
Choose Pearl White
DroneTrack Drone Detection System in Matte Black on a tripod

Matte Black

$5,995 per unit
Choose Matte Black

Need the figures for a tender or a site plan?

Download the full specification as a PDF, or ask our engineers for a figure that isn't listed here. We answer Mon–Fri, 8am–6pm ET, and reply within 1 business day.
Buy the system
Talk to an engineer

DroneTrack spec sheet (PDF)

Every confirmed figure on this page, on two printable pages. Figures still to be confirmed are marked.
Download the spec sheet
DroneTrack home
Passive RF direction-finding and Remote ID drone detection, engineered and built in Columbus, Georgia 31909, USA. 500+ units deployed in 20+ countries.

Product

Company

Support

Threat intelligence briefing

Monthly drone incident data, new signal signatures and regulation updates for security leaders.

Threat Intelligence Briefing

"*" indicates required fields

This field is for validation purposes and should be left unchanged.